Vintage Air Front Runner Installation - Big Block, page 2
Don't forget to connect the bypass hose. Use the shortest
possible 90 degree elbow. Slide the AC compressor onto the main housing.
Install the AC mounting spacer on back side of the main bracket
and insert the bolt from the rear. The bracket will have to moved forward
to allow this. Don't forget the spacer for the bottom AC bolt.
Torque the AC compressor bolts to 15 ft. lbs. Slide the alternator
onto the lower alternator bolt. The bolt should have been installed when
you installed the power steering bracket.
Slide upper alternator bolt through main bracket (from rear),
and into the alternator. This bolt should be inserted before installing
the main bracket. Torque altenator bolts to 12 ft. lbs.
Install power steering pulley onto the power steering pump
all the way down. Use an installer to keep it straight. Install pulley flush
with shaft. Install pulley flush with shaft.
Hot Rods & Custom Stuff, 2324 Auto Park Way, Escondido, CA.,
1-800-HOT-ROD-5.
Hot Rods & Custom Stuff - builds, restores, paints, services
and sells parts for classic autos, cars, trucks and street rods.